Schedule a Call Back
Igus drylin W becomes first EHEDG-certified linear guide
Articles- Sep 28,26
Igus has developed a tool-free drylin W linear guide for hygienic applications, becoming the first linear guide worldwide to receive EHEDG certification.
Easy cleaning of machines and systems is crucial in the food industry. However, the carriages of many linear guides are difficult to disassemble. To reduce downtime, Igus has developed a new drylin W linear guide with a polymer carriage that can be removed for cleaning without tools. The system is the first linear guide in the world to receive certification from the European Hygienic Engineering and Design Group (EHEDG), giving it official approval for food technology.
Linear guides are widely used by designers of automation solutions for the food industry. They enable the movement of sealing stations in thermoforming packaging machines, the positioning of dosing heads in filling systems and the guiding of knife units in bread slicers.
Despite their importance, linear guides can present challenges in applications with stringent hygiene requirements, as lubricants, abrasion and dirt can accumulate in gaps, contact surfaces and hard-to-reach areas.
“If thorough cleaning is required, dismantling classic systems is often complicated and structurally limited,” says Mira Loges, Development Engineer for drylin, Igus.
The demand is therefore for linear guides designed in accordance with hygiene requirements that can also be cleaned quickly.
“We have launched such a solution with the new drylin W linear guide, the first linear guide in the world to receive certification from the European Hygienic Engineering and Design Group (EHEDG),” says Loges.
EHEDG is an international organisation that establishes standards for hygienic equipment design with the aim of enhancing food safety. An EHEDG certificate confirms that a component is easy, complete and safe to clean, providing an important advantage for operators with the highest demands on process and product safety.
The certification confirms that the design of the drylin W linear guide system contributes to reducing the risk of contamination and equipment failures.
Linear guides can make cleaning machines and systems in the food industry difficult.
“Classic ball recirculation guides, for example, often have to be dismantled with tools and removed over the end of the rail,” says Loges. “This leads to unnecessary maintenance work and downtime, which some users complain about.”
Igus has therefore designed the new linear guide so that it can be dismantled without tools. The system consists of two stainless steel shafts and a monolithic polymer sliding carriage onto which users can bolt their structures.
“In the event of a complete system cleaning, the carriage can simply be pulled off the rail and cleaned separately. The rail can be cleaned in place without disassembly,” explains Loges.
Many conventional ball recirculation guides use lubricants to which dust, abrasion and dirt particles can adhere. This can create an abrasive mixture that impairs ease of movement and represents a potential contamination risk.
Igus has therefore designed the new linear guide in accordance with EHEDG guidelines. The electropolished round shafts have a surface roughness of less than 0.8 micrometres, facilitating effective cleaning as germs and product residues hardly adhere to the smooth surface.
“We consistently followed the EHEDG guidelines during development. One challenge was the transition from the shafts to the shaft supports or rail connectors. But even here we managed to follow the guidelines. The transitions are milled so that minimum radii of three millimetres could be maintained everywhere,” explains Loges.
A floor seal made of FDA-certified silicone also ensures that no dirt or micro-organisms can accumulate between the rail and the surface.
Another feature is the carriage made from the blue high-performance polymer iglidur A160. It is PTFE-free and PFAS-tested, while integrated microscopic solid lubricants enable hygienic, lubrication-free dry operation.
“We also made sure that the material has low total moisture absorption. This means the carriage retains its shape and functionality even after many intensive cleaning cycles,” says Loges.
igus
drylin W
EHEDG certification
hygienic linear guide
food industry automation
iglidur A160
lubrication-free linear guide
food processing equipment
Related Stories
Smart Manufacturing
Igus drylin W becomes first EHEDG-certified linear guide
Igus has developed a tool-free drylin W linear guide for hygienic applications, becoming the first linear guide worldwide to receive EHEDG certification.
Read moreSmart Manufacturing
Igus Launches Hybrid Ball Bearings For Reliable, Dust-Resistant Conveyors
Igus develops maintenance-free hybrid ball bearing from the xiros series for dirt-resistant operation.
Read moreMachine Tools & Accessories
igus launches dirt-resistant hybrid ball bearing for overhead conveyors
The new xiros hybrid ball bearing combines stainless steel and high-performance plastic for lubrication-free operation and load capacities of up to 39 kg.
Read moreRelated Products
Fanless Industrial Pc for Smart Manufacturing
Smart Manufacturing
CONTEC Launches BX-M4600 Series - Fanless Industrial PC for Smart Manufacturing.
latest News
Subscribe to iNoW
For Industry News on WhatsApp, Give a Miss Call on: +91 84228 74016
