Pethe Industrial Marketing Co Pvt Ltd offers Master Controller. Master controllers are used for operation of contractor’s equipment controlling E.O.T. Cranes & Rolling mills drives. The controllers are made in dust proof enclosure in IP-54 degree of protection, up to 6 notches either side with maximum 24 contacts as per desired sequence with spring return arrangement & deadman's handle arrangement are available. Master Controllers are compact up to 4-0-4 step suitable for Grab-Hoist, CT-LT maximum contacts 16 per motion with spring return arrangement. Master controllers are of cam type where in contacts are actuated by individual cams mounted on operated shaft. Master controller is housed in enclosure and provided with an easily removable cover with ample area for maintenance. The cam shaft is mounted on bearing bushes on walls of housing. The cams are made of derlin material and fixed on square. Deadman's control: This consists of one auxillary contact of two circuit block (1 NO+ 1 NC) operated through a spring loaded push button provided on joystick handle in case of operator looses the grip over button during operation, motion will come to stop as main contactor will be de-energised. Spring Return arrangement: The master / cam controller can be provided with spring return arrangement whereby handle returns to the neutral position when it is released.Supplier of Master Controller and manufacturer of Master Controller. Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer of Master Controller in India.
ASAPP INFO GLOBAL SERVICES PVT. LTD A-303, Navbharat Estate, Zakaria bunder Road, Sewri(West), Mumbai-400 015, Maharashtra, India.
© IPFOnline 2020 All Rights Reserved.