The first 4 are AUTOMATIC TOOLS, FOR BACK SPOT FACING, duplex back spot facing, back chamfering and duplex back chamfering, respectively. Due to centrifugal force, during clockwise rotation of the spindle, the wing folds in and enters the hole; in anti-clockwise rotation, wing folds in and the tool retracts from the hole. Tools are offered for holes Ø8 mm and above. Tools between Ø8 mm to Ø12 mm, are offered with solid HSS wings. Tools above Ø12 mm are offered with indexable, standard carbide inserts. Tools are manufactured, using EN-353, case hardened steel for torsion load resistance. Being automatic, these tools are most ideally used in programmable machine. These tools save on heavy machine hour cost in interpolation mode. No manual interruption is required at any stage of using of these tools.
The 5th & 6th are multi-lipped COUNTER BORE TOOLS, using standard, indexable carbide inserts. The guiding pilots are detachable and interchangeable. Tools are manufactured, using EN-353, case hardened steel for torsion load resistance.
Tools are offered for hole Ø12 mm and above.
The last image is of DUPLEX DEBURRING & CHAMFERING TOOL for holes Ø5 mm and above. While entering the drilled hole in clockwise rotation, the tool deburrs the top and bottom opening of a hole. In the process, it leaves a light chamfer around both the ends of the hole. The HSS blade can be reground for optimum life.
Affordable, operator friendly, these tools are used in most of the engineering shops in India and abroad. These tools are custom-made with short lead time. Contact the manufacturers for more information:
Shenoy Engg Pvt Ltd
#7, 16th Cross, Doddanna Indl Estate
Near Peenya II stage, BANGALORE-560 091
Cell: 9243437487 / 6360727675
ASAPP INFO GLOBAL SERVICES PVT. LTD A-303, Navbharat Estate, Zakaria bunder Road, Sewri(West), Mumbai-400 015, Maharashtra, India.
© IPFOnline 2021 All Rights Reserved.