Six Zone Ramp/Soak Pwht Temperature Control Panel – PRC-6000-PNL

<ul style="margin-top:0in" type="disc"> <li class="MsoNormal">This six zone microcontroller based multiple ramp/soak programmable PID/On-Off temperature controller cum profile programmer which is designed to improve reliability, accuracy, and control of six independent heating zones. PRC-6000-PNL-Ready to use panel with input/output connections for SR/PWHT Cycle.<o:p></o:p></li> <li class="MsoNormal">Its key features include: accepts 6 K type (Cr/Al) thermocouple; blue colour graphical LCD screen for clear visibility; six independent control Relay and 1 fault relay; on line facility to change the Ramp rate and Soak temperature; servo start from the current process temperature; 1 to 4 programmable ramp/soak steps<o:p></o:p></li> </ul><p class="MsoNormal" style="margin-left:.5in">cascading of controllers using master/slave facility; °C/°F unit of measurement selectable through keyboard; programmable delayed start timer – 0.0 to 99.9 hours.<o:p></o:p></p><ul style="margin-top:0in" type="disc"> <li class="MsoNormal">All six zones can be independently programmed for different ramp/soak patterns. <o:p></o:p></li> </ul><p class="MsoNormal" style="margin-left:.5in">All six zones can be run independently at different times. All six zones can be run with a common ramp/soak profile with a built-in hold facility to control all the zones in synchronization. Deviation hold value can be programmed for each zone.<o:p></o:p></p><p class="MsoNormal" style="margin-left:.5in">PRC-6000 can be used as six independent controllers or a single six-channel controller.<o:p></o:p></p><p> </p><ul style="margin-top:0in" type="disc"> <li class="MsoNormal">Its application is: furnace/oven control; PWHT and SR heat treatment cycle.<o:p></o:p></li> </ul>