• R K Transonic Engineers Private Limited

Ultrasonic Cleaning Equipment

.K.Transonic offers Ultrasonic Cleaning Equipment, VD/2-Stage, 500. Salient features: eight nos. of secondary cooling coils covering 75% of free board zone for minimum losses; four nos. of primary cooling coils between the vapour tank & ultrasonic tank to arrest the vapour flowing to the ultrasonic tank; indirect heating of solvent enhances the life cycle of the solvent; proper insulation of the tanks minimizes the heat loss & in turn saves electrical energy; all the fittings of cooling coils, heater tubes, water separator etc., are fitted with threading arrangement (no welding); water separator is specially deigned with cold water jackets for effective removal of atmospheric water from the solvent; ultrasonic generators are encased in separate casing for convenient servicing; ultrasonic generator is having auto tuning circuit for optimum power during loading; easy serviceability of generators even without using soldering iron; heater tubes are mounted to the tanks with flange fitting for easy replacement of tubes in future; available in all sizes as per requirement. Advantage of oil bath heating: in direct heating the heaters are directly in contact with the solvent & the temperature near the heater tube is much higher which in turn disintegrates the solvents chemical properties; in oil bath indirect heating the temperature of the oil is raised 10 to 15 degree C. above the boiling point of the solvent. Once the temperature reaches the desired set point the heaters are cut off leading to continuous formation of the vapour. Since this tank is completely insulated the heat loss is minimum; heater life increases drastically; recyclable life of the solvent increases; no scale forming due to over heating and available in all sizes.