Flame Arrestors

Flame Arrestors

Amarama Engineers

A Flame Arrestor is used to prevent the propagation and transmission of flame generated in the line from an unprotected side to the protected side of a flame arrestor but at the same time to allow the vapours to pass to the protected side. Flame arrestors are installed on the vents of storage tanks and vessels or in process lines where flammable gases are being transferred.

Add to MyIPF

  • Manufactured according to IS: 11006 and international electro technical commission code IEC 60079-1:2007, tested according to IIA, IIB and IIC gas groups.
  • Arrestor bank is the heart of the flame arrestor, consists of finely crimped metal ribbons to form a corrugated element.
  • The corrugated gap, i.e., the maximum experimental safe gap (MESG) is maintained according to IEC 60079-1 for various gas groups like IIA, IIB and IIC.
  • Available in various types to suit different applications.

Products from Amarama Engineers

Flush Bottom Tank Valves Ball Type Flush Bottom Tank Valves Ball Type
Pressure Safety Relief Valves Pressure Safety Relief Valves

Products from MACHINE TOOLS, POWER & HAND TOOLS Category

Perforated Metal Facades Perforated Metal Facades
Rotary Broaching Tool Rotary Broaching Tool
Polygon Turning Machine - TPT-5S, TPT-5ST Polygon Turning Machine - TPT-5S, TPT-5ST