• Prime Technologies

PC Retrofit

Prime Technologies offers a PC Retrofit, Gear MAS III. This is designed and state-of-the-art PC based measurement and analysis system for gear roll tester. This Gear MAS III can be used with double flank gear roll tester of any make like Carl Mahr, Goulder Mikron, Osaka or Indian. System description: the element of system is LVDT probe/pick up; signal conditioning electronics; filter electronics; ADC electronics; Gear MAS III software for roll tester; linear glass scale and counter card. By rolling the measuring gear with a master (free from backlash) the centre distance will vary according to the errors of gear. This variation is measured by an axial LVDT probe and signal conditioning electronics. The analogue output is digitised by ADC Electronics. The raw data is filtered (for separation of low and high frequency components of data) and use for evaluation of various parameters as mentioned below. The linear glass scale is fitted for accurate setting of centre distance. Features: evaluation of following parameters as per DIN 3963. Fi": double flank tooth error, Fi": double flank rotational deviation (total composite error), Fr: runout error/eccentricity error, qualitative analysis of involutes curve and pressure angle error graph; entire DIN table pre-installed; facility for user configurable tolerance; automatic detection of DIN grade measured job data; provision of archive/recall of standard and history data; built-in hardware diagnostics and software calibration facility; generation of multicolour scaled reports in graphical format; user-friendly and menu-driven operation; open-ended design provides easy scope for adding many more user desired features; and viewing measured graph at different magnification.