Electronic Automation (P) Ltd (EAPL) offers a digital 3-phase, 4-wire Dual Source Energy Meter, Model EMS-17, having different electrical parameters that can be either scrolled or held in any one of the parameter. This model, as the name suggests, can allow the user to view parameters from any two different power sources (2nd source whenever the meter senses signal from 2nd source, else it will be 1st source) and save the same in two different registers – generator (G) and mains (M) respectively. Parameters that can be viewed are voltage, current, frequency, power factor, RPM, phase angle, active power, active energy and load ‘on’ hours. These meters can be connected through RS485 Modbus RTU communication to any interfaces like computer, etc. These meters have 2 window displays, top displaying the value in numeric Red LEDs and bottom displaying the corresponding parameter simultaneously in alphanumeric green LEDs. Pulse output LED is also provided to check calibration. EAPL meters have a very user-friendly programming system to program CT ratio (primary, secondary), PT ratio (primary, secondary), resetting energy to default (0), Device ID, Baud rate, and changing password. All program settings are protected and can be accessed only by entering the valid 4-digit password. Size: 96 x 96 x 117 mm. Areas of application: generator panels and AMF panels.
ASAPP INFO GLOBAL SERVICES PVT. LTD A-303, Navbharat Estate, Zakaria bunder Road, Sewri(West), Mumbai-400 015, Maharashtra, India.
© IPFOnline 2021 All Rights Reserved.