These precision drives offer digital and analog remote control (I/O) options and simple programming—ideal for automated process and network applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad or remotely; keypad lock/unlock feature protects settings. Motor is reversible, so you can purge tubing before or after pumping and pump fluid in either direction.
Applications:
What's Included:
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country specific plug/cord set; please specify ultimate destination when ordering.
No. of Pump Heads Accepted | 2 |
Type of Pump Heads | Accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm |
Housing Material | ABS Plastic and Aluminum |
Control Type | Digital Variable Speed |
Pump Series | L/S |
Speed | Variable |
Reversible Motor | Yes |
Digital Dispensing | Yes |
Description | L/S Computer-Compatible Digital Drive, 0.1 to 600 rpm, 115/230 VAC |
Magnetically driven, precision-geared pump heads provide smooth, accurate, pulseless fluid delivery. The magnetic drive and static seals keep fluids securely inside and potential contaminants out. Chemical resistant materials handle a wide range of materials (due to wetted parts). Pump heads are compact and easy to service. Modular design offers flexibility—configure to your specific needs.
Applications:
Flow Rate (mL/rev): | 0.64 |
Max Flow Rate (mL/min): | 32 |
Min Flow Rate (mL/min): | 32 |
Max Flow Rate (LPM): | 3.2 |
Differential Pressure (PSI): | 80 |
Differential Pressure (bar): | 5.5 |
Suction Lift, Wet (in H?O): | 24 |
Suction Lift, Wet (mm of H?O): | 610 |
Max Motor RPM (rpm): | 10000 |
Wetted Parts: | 316 SS, PEEK, PTFE |
Seal Material: | PTFE |
Body Material: | 316 SS |
Gear Material: | PEEK |
Inlet Connection (NPT(F)): | 0 |
Outlet Connection (NPT(F)): | 0 |
Reversible: | Yes |
Relief Valve: | No |
Internal Bypass: | No |
Run Dry:Under | 30 seconds |
Duty Cycle Continuous: | Yes, 150 to 5000 rpm |
Particulates: | No |
Max Temperature (° F): | 130 |
Min Temperature (° F): | -45 |
Max Temperature (° C): | 54 |
Min Temperature (° C): | -43 |
Max Viscosity (cP): | 1500 |
Min Viscosity (cP): | 0.2 |
Description: | A-Mount Cavity Style Pump Head; SS/PEEK/PTFE; 0.64 mL/rev |
Pumping action is achieved by compression of a circular loop of elastomeric hose with two diametrically opposed rotating shoes. With this rotational motion fluid is pushed ahead inside a hose which is compressed and relaxed by shoes mounted on a rotor. When each shoe reaches the end of the loop, the reinforced tube immediately returns to its original shape, thereby ensuring suction and priming, creating a strong vacuum pulling more fluid inside.
Applications:
ceramic slips, mold filling, filter press, sludge, clay slurry, lime liquor, flocculate dispersion, liquid or fibrous mortar, liquid plaster, light concrete, acid, alcohol, detergent pumping, water base and acrylic paint, pigments, wall coating, etc.
Max Flow Rate (GPM): | 0.25 |
Max Flow Rate (LPM): | 0.95 |
Self-Priming: | Suction lift up to 29 ft (8.8 m) |
Max Motor RPM (rpm): | 37 |
Motor Enclosure Type: | TEFC |
Power (VAC): | 208 to 230 / 460 |
Power (Hz): | 60 |
Power (Phase): | 3 |
Power Conduit Box Connection: | Yes |
Wetted Materials: | Natural Rubber |
Inlet Connection: | 10 mm Nipple |
Particulates, Max size dia (in): | 0.06 |
Run Dry: | Yes |
Max Particulates Size Diameter (cm): | 0.15 |
Max Temperature (° F): | 158 |
Min Temperature (° F): | 32 |
Max Temperature (° C): | 70 |
Min Temperature (° C): | 0 |
Viscosity, Max (SSU): | 60000 |
Hose ID (mm): | 10 |
Motor hp: | 1\3 |
Description: | Series HDN10 |