• Superb Products

Commutator Soldering Unit

Superb Products offers Commutator Soldering Unit. In this soldering system rotor is placed on the machine and solder is pumped all around the commutator for pre-determined time. At the end of cycle, the solder recedes and the rotor can be taken off the machine. It is observed that soldering of conductors to commutator is near to 100% reducing chances of heat built-up and fly off. It can accommodate rotors weighing from 5 kg to 1500 kg, depending upon type of the machine. Cycle time including preheating is 10 to 45 min. Actual soldering time is between 30 to 60 sec, 95% tin: 5% silver or 95% tin: 5% antimony solders can be used. The unit also has centralised controller that control preheating time and temperature, solder temperature, soldering cycle time, solder flow and repeat cycles. It can store up to 9 programs.