Crash Test Stand for Car Parts

Crash Test Stand for Car Parts

Neelkamal Agency Private Limited

Neelkamal Agency Pvt Ltd offers a Crash Test Stand for Car Parts. Requirement: a high-dynamic linear guide is needed which can take high acceleration forces. The slide is driven by two cylinders that are slowed down after 2m. By now the slide is moving without gear. After 5m the slide crashes undamped onto a buffer with the test material. Solution: the Franke roller guide FDH35. The slide is provided with 4 cassettes, which are mounted in the slide's centre of gravity. This way the forces from the crash are not transmitted directly into the cassettes. The cylinder is provided with two cassettes. Additionally linear modules TLH15-5000 are used that lead the slide back into the starting position. Technical data: the slide is accelerated up to 60km/h over the distance of two metres. Some tests even take place with speeds up to 80km/h - this corresponds to an acceleration of 22G. 15-20 tests are done approx per week.

Add to MyIPF

Share

Products from Neelkamal Agency Private Limited

Crash-Test Equipment Crash-Test Equipment
Roller Guide for Crash Test Stand Roller Guide for Crash Test Stand
Aluminium Linear Systems Aluminium Linear Systems

Products from MACHINE TOOLS, POWER & HAND TOOLS Category

Heavy Duty Precision Lathe Machine Heavy Duty Precision Lathe Machine
Boss Rotors Boss Rotors
Gear Blanks Gear Blanks
Stub Axle Stub Axle