• M A N Industries

Micro Inverter

M A N Industries provides micro inverters that have DC reactor connectivity for harmonic suppression. These inverters are of plug-n-play type and have protection facility for motor. Short-circuit protection is given on output terminals. The standard speed range is 1:20. Overload capacity of the unit is 150 per cent of rated output current for one minute. The inverters can be mounted on DIN rail and used with upfront speed control potentiometer. Technical specifications: Voltage class: 200V single/three phase Model CIMR-J7AA: 3-phase - 20P1; 1-phase - B0P1 Maximum applicable motor output kW (HP): 0.1 (0.13) Inverter rated kVA: 0.3 Rated output current (A): 0.8 Maximum output frequency (Hz): 400 (programmable) Rated input voltage and frequency: 3-phase - 200 to 230 V, 50/60 Hz and 1-phase - 200 to 240 V, 50/60 Hz Allowable voltage fluctuation: +10 to –15 per cent Allowable frequency fluctuation: +/-5 per cent Control method: sine wave PWM (V/f control) Output frequency resolution: 0.01 Hz Protections: motor overload, instantaneous over current, power loss ride through, ground fault, short circuit, fin overheat, input over and under voltage and stall prevention. Humidity: 90 per cent RH or less (non-condensing) Location: indoors (free from corrosive gases or dust) and within 1,000 m MSL elevation.