• Cenlub Systems

Hand Pump without Reservoir

Cenlub Systems offers Hand Pump without Reservoir. These Hand Pump without Reservoirare suitable for Manual Centralised Lubrication System of light duty automatic machines such as Small power presses, Packing machines, Die punching machines, Milling machines, Single spindle automats, Looms, Surface grinders, Pouch filling machines etc. etc. Normally these pumps are suitable for 2-40 lubrication points. These pumps are very simple in construction. The construction is spring return piston type. The piston is operated by pulling a cam handle. The other salient features are strainer at the inlet port, a pressure reducing system which is very important for proper operation of metering cartridges.
Normally outlet is on right hand side of the pump. However pumps with outlet at left hand side and with outlets at both sides are also available. The pump outlet is suitable for direct fitment of 6 mm OD tube without help of any other fitting. The outlet thread size is M 10x1 (F). Relief valve to flow back excess oil is also provided with these pumps. The pumps are provided with oil level gauge for visibility of oil in reservoir. (Model H-7 is without reservoir).
Always fill clean oil to get better life and trouble free operation of these pumps. It is not recommended to operate dry pump. Pumps are suitable for oil with viscosity range 40-1000 cst.