Pumping action is achieved by compression of a circular loop of elastomeric hose with two diametrically opposed rotating shoes. With this rotational motion fluid is pushed ahead inside a hose which is compressed and relaxed by shoes mounted on a rotor. When each shoe reaches the end of the loop, the reinforced tube immediately returns to its original shape, thereby ensuring suction and priming, creating a strong vacuum pulling more fluid inside.
ceramic slips, mold filling, filter press, sludge, clay slurry, lime liquor, flocculate dispersion, liquid or fibrous mortar, liquid plaster, light concrete, acid, alcohol, detergent pumping, water base and acrylic paint, pigments, wall coating, etc.
|Max Flow Rate (GPM):||0.25|
|Max Flow Rate (LPM):||0.95|
|Self-Priming:||Suction lift up to 29 ft (8.8 m)|
|Max Motor RPM (rpm):||37|
|Motor Enclosure Type:||TEFC|
|Power (VAC):||208 to 230 / 460|
|Power Conduit Box Connection:||Yes|
|Wetted Materials:||Natural Rubber|
|Inlet Connection:||10 mm Nipple|
|Particulates, Max size dia (in):||0.06|
|Max Particulates Size Diameter (cm):||0.15|
|Max Temperature (° F):||158|
|Min Temperature (° F):||32|
|Max Temperature (° C):||70|
|Min Temperature (° C):||0|
|Viscosity, Max (SSU):||60000|
|Hose ID (mm):||10|
ASAPP INFO GLOBAL SERVICES PVT. LTD A-303, Navbharat Estate, Zakaria bunder Road, Sewri(West), Mumbai-400 015, Maharashtra, India.
© IPFOnline 2021 All Rights Reserved.