Centrifugal Blower And ID Fans

Centrifugal Blower And ID Fans

AKJ Industries

AKJ Industries offers Centrifugal Blower And ID Fans. Centrifugal Fans and Blowers typically have one of six types of wheels that draw the air into the inlet of the blower housing, through the wheel, and discharges it at 90 degrees out through the discharge of the housing. The two most common types of Centrifugal Blowers are Pressure Blowers and Volume Blowers. Pressure Blowers are designed to draw or push air at high pressures, rated in static pressure water gauge (SPWG). Volume Blowers are designed to draw or push larger volumes of air, rated in cubic feet of air per minute (CFM),at lower static pressures than Pressure Blowers. Centrifugal Blowers are typically made of fabricated steel, stainless steel or cast aluminum.


Add to MyIPF

  • Air aFlow: 0.1 – 260 m3/min ( 6 – 15600m3/hr)
  • Pressure:One Stage Type : 0 – 10000 mmAq
  • Two Stage Type: 10000 – 20000 mmAq
  • As Vacuum Pump: up to –5000 mmAq

Products from AKJ Industries