• Analysers, Analysis Systems and Monitors

The Vibration analyser 5050 is a very powerful instrument for tackling a variety of vibration problems on rotating machinery. It can measure vibration within a very wide frequency band of 60 rpm to 6,00,000 rpm. The Graphic-Panel on top of the· instrument is designed to represent the frequency response of the instrument. The vibration may be measured in terms of rms acceleration, rms velocity or peak-peak displacement. It meets the requirements of IS 11724 international standards like BS 4675, or ISO 2954. When connected to an optional stroboscope, the unit will also generate once-per-cycle flashes that will make the rotor appear stationary at a position related to the position of unbalance.

• Quality checking of vibration on fans, blowers, motors, pumps, compressors, turbines generators, rollers, machine tools, textile machinery, and for any machine that rotates.
• Vibration troubleshooting based on finding out the frequencies of vibration present in a machine.
• In-position correction of unbalances using the optional stroboscope.
• For condition monitoring of installed machinery by regular, periodic measurements made on machines and observing the trends in these readings.
• The unit may be carried from site to site easily, as it is the most compact vibration analyser available. It is supplied in a briefcase size carrying case, and in its basic form, does not require a power connection near the machine, as it runs off internal rechargeable batteries. However, the stroboscope must be run off the ac power supply.

• It can be used for vibration measurement to IS 11724, and also vibration troubleshooting based on Frequency Analysis.
• With an optional stroboscope, it can be used for balancing various types of rotors in-situ.
• A PC based balancing program for 1 - plane and 2-plane balancing is also available optionally.
• Portable, compact enough to fit into a briefcase.
• Totally electronic membrane type switches for control of the instrument parameters.
• Rechargeable battery operation leading to freedom from battery replacement.
• Graphically laid out control panel makes it easy to understand control parameters.
• Electronically tuned filter with digital frequency display.
• Very easy to use.

• Sensor: Piezo-electronic accelerometer type sensor
• Measuring Modes range: True rms acceleration, True rms velocity and Pk-Pk Displacement
• Acceleration: 0.3 m/sec² to 0-1000 m/sec² in eight scales
• Velocity: 1 mm/sec to 0-3000 mm/sec in eight scales
• Displacement: 3 microns (Pk-Pk) to 0 - 10,000 micron (Pk-Pk) in eight scales
• Frequency range: 60 rpm (1 Hz) to 6,00,000 rpm (10 kHz) in four ranges
• Filters: High pass at 60 or 600 rpm
• Low pass at 60,000 or 6,00,000 rpm
• Tunable filter with Q of 10 over four decades, electronically tuned with Up and Down touch switches
• Controls: All switches are electronic feather-touch membrane type, oil and dust protected
• Display: Analog meter for amount display, and digital meter for centre frequency display
• Construction: Aluminium enclosure with front carrying handle and top control panel
• Dimensions: 200 (D) X 275 (W) X 80 (H). without feet
• Weight: 2.2 Kg. without accessories
• Power: Internal rechargeable Ni-Cad batteries with built-in charger
• Environmental: Max storage temperature 50"C

• Max usage temperature 45°C
• Min usage temperature O"C
• Avoid direct exposure to sunlight