Maxpreci Machines, based in Bangalore, manufactures vertical cylinder honing machines that can hone at any desired position. Quick correction of bore is enabled by the push of an oscillation button. Direct reading digital display for spindle RPM is provided and also L C display has been incorporated for self-diagnostic features, ie, for quick identification of faults. Features: Up and down push button provided for fast stroke setting Spindle stops only at the upper set position when switched off Infinitely variable spindle rotation and stroke speed enabling selection of suitable cutting speed depending on material to achieve the desired crosshatch pattern Synchronised stop of reciprocating and rotating movement avoids damage of crosshatch finish Technical specifications Minimum honing diameter: 62mm (2.5") (optional 32mm; 1.25") Maximum honing diameter: 140mm (5.5") (optional 200mm; 7.8") Minimum honing stroke: 50mm(1.96") Maximum honing stroke: 350mm (13.7") Stroke speed (infinitely variable): 1-12m/min (39.3"- 472.4") Spindle speed (variable): 25-200 rpm Motor-spindle drive: 1.5 hp Maximum block length: 1100mm (43.3") Honing head traverse: 1000mm (39.3") Length of the machine: 1620 (63.7") Width of the machine: 1300mm (51.2") Height of the machine: 1750mm (68.9") Work weight (approx.): 1700 x 1400 (67" x 55") Net weight (approx.): 720 kg Gross weight (approx.): 1400 kg Shipping volume: 6m3 Standard accessories: Honing head 62-140mm (2.5" -5.5"): 1 Number Double end spanner 24-26mm: 1 Number T-bolt with nut and washer: 4 Numbers Setting up parallel tightening bolt with rut and washer: 2 Numbers Blocks tightening clamp: 4 Numbers Optional accessories Quick camping device V-type cylinder block clamping fixture Friction feed hone head
IPFonline Limited, 2nd Floor, Shafika Building, 17/7 Kodambakkam High Road, Nungambakkam, Chennai - 600 034.
Tel: +91 44 42991234 (30 Lines). Fax: 91-44-42108441. Email: email@example.com