Phoenix Contact India offers the PPS comfort compressed air-operated rail cutter. This is used for rapid cutting of the four regular mounting rail sizes NS 35/7.5, NS 35/15, NS 15 and NS 32, as well as the NLS neutral bus, and cuts virtually without burrs and to exact dimensions. The cutter is equipped with a hydro-pneumatic drive, which has to be connected to a 6-bar compressed air source to be put into operation. The movable length stop on the 1 meter-long measuring bar can be set to the desired rail length to within less than a millimetre. Simply by pressing the compressed air key it is then possible to cut any desired number of mounting rails without difficult. It is also possible to make fixing holes, by adding stamping bits. These are available for both round holes and slots, in varying dimensions.