Mould Dehumidification Systems is launched by Bry-Air (Asia) Pvt. Ltd. In plastics processing, mould sweat is a serious problem. Chilled water reduces cycle time, but during humid period, condensation forms on the surface of the mould, causing imperfections in the parts. Mould sweating causes parts to be imperfect structurally or cosmetically, thereby increasing scrap. The usual method to correct this problem has been to raise the mould temperature, thereby increasing the cycle time and decreasing production – an unattractive solution to a continuing problem. An eminently attractive, alternative is to blanket the mould surface with a constant supply of dehumidified air at an appropriate dew point below that of the chilled water in the mould. Bry-Air, a Pahwa group company, is a global solution provider for complete environmental control with specialization in humidity control, dehumidification, drying, storage, preservation, air and gas purification and plastics auxiliaries supported by state-of-the-art facilities, worldwide operations and customers in almost every industry. ISO 9001:2000 and ISO 14001 certified Bry-Air, worldwide, is known for its expertise as a “solutions” company for moisture and humidity control for general industry as well as reliable auxiliaries for plastics.
Improves cycle time, Increases mould life
Reduces scrap rate
Portable, Easy to handle
Enhances part/product quality; and
Choice individual, Plant wide and centralised control