Filter Concept make cartridge filter system comes in a wide range of flow and contaminant holding capacities. The housing can accommodate up to 200 cartridges. Cartridge filters are normally used as polishing filter in almost all process industries. These are constructed of filter housing, filter cartridges, tube sheet to mount cartridges and positive sealing arrangement for cartridge depending upon type of cartridge, and choice of end connections. Positive sealing arrangement for cartridge filter assures no particle or fibre migration, even after high differential pressures. Operation: contaminated fluid enters the housing and is distributed evenly around the filter cartridges. Filtration takes place from outside to inside. Solids are collected on the outside of filter cartridges and clear filtrate collected at outlet. Features and benefits: low pressure drop; high dirt holding capacity; zero hold up design; permanently piped housing are opened without special tools and without disturbing the piping; machined cover gasket groove provide positive O-ring sealing; easy cleanability; in-line inlet and outlet high flow rates; positive sealing arrangement to avoid bypassing; suitable for double open end (DOE), code 7 and 222 O ring type filter cartridge; accommodates 10", 20", 30", 40", 50" and 60" long filter cartridges; end connections for 3/4" through 24” pipe; V posts or threaded centre posts; quick opening tri clovers design; easy to operate and low maintenance; low downtime; flow rate up to 2000 m3/hr; custom design services; housings are permanently piped; all housings made from SS 316L, SS 316 and SS 304 are mirror polished and electro polished to resist adhesion of dirt and scale; carbon steel housing are painted externally and internally epoxy coated; ASME code stamp available; duplex/triplex/jacketed cartridge filter unit designs are available; and high temperature and high pressure design are available.