Filter by:  

 

Cortec adds extra VpCI protection to corrosion inhibiting coating



January 2017 – Cortec’s time-proven VpCI®-368 coating has just become more powerful with the addition of extra Vapor phase Corrosion Inhibitors! Already, VpCI-368 provides excellent protection to metal substrates exposed to harsh outdoor conditions. The dark brown viscous liquid dries into a firm moisture-displacing wax-like film that can be removed by mineral spirits or alkaline cleaners such as Cortec VpCI®-414. The film can be used for a variety of applications where heavy-duty corrosion protection is needed:

<< Pipe coating
<< Parts storage
<<  Underbody coating
<<  Wire rope
<< Steel plate
<< Machined parts

VpCI-368 has an extensive record of use for mothballing and layup of equipment, protection of shipments, and preservation of spares. Now, VpCI-368 EVP (Extra Vapor Protection) is also available for application in complex, sealed spaces where a greater concentration of vapor inhibitor is beneficial. The extra dose of Cortec® VpCI vaporises from the coating, fills the enclosed space, and adsorbs on difficult-to-reach surfaces. This is helpful on applications such as pipe internals where it is challenging to thoroughly cover all metal substrates.

VpCI-368 EVP coating is flexible and offers excellent outdoor protection that is much easier to handle and remove than traditional wax-based coatings commonly used in military and similar applications. VpCI-368 EVP is UV resistant and passes 900-1500 hours of ASTM B-117 intense salt spray testing applied at 2-3 mils on carbon steel. It also provides multi-metal protection on stainless steel, copper, aluminum, and cast iron. The cured film is heat stable up to 392°F (200°C) and is commercially equivalent to MIL-PRF-16173E (Grades 1 and 2). It can be applied by spray or brush.



Advertise Here