Pipe Clamps


Heat Shrinkable Tubing

Pipe Clamps




Product Profile: MUPRO offers Pipe Clamps - EuroQuick, galvanised.


Advantages
  • With highly elastic insert
  • Captive fastening screws
  • High rigidity thanks to reinforcing rib
  • Temperature range from -50 °C to +110 °C
  • Fastening screws with combination cross-head
  • Safe handling thanks to rounded flange
  • Clip-over edges and the guide rib of the pipe clamp insert ensures a secure hold and prevents it from being pushed out
Application
  • Suitable for fixings in housing and industrial areas
  • Suitable for fastening of drinking water and heating pipes
  • For indoor use

Single Boosed Clamp,Junior

Single Boosed Clamp, Junior




Product Profile: MUPRO offers Single boosed clamps JUNIOR, two-piece, galvanised.


Advantages
  • Proven two-piece clamp
  • High stiffness due to reinforcing bead
  • The 2 locking screws allow adjustment to accommodate a greater variation in pipe diameter
  • Tightening bolts with combination cross-head convenient for power driver
  • Fastener screws with captive washer
  • Connecting thread with combithread M8/M10
  • DÄMMGULAST® vibration controllining  with green identification stripe: average sound level improvement up to 18 dB(A)
  • Vibration control tested
Application
  • Suitable for pipe attachments in industrial areas
  • Suitable for fastening of drinking water and heating pipes
  • For indoor use

Heat Shrinkable Tubing

Single Boosed Clamps, Heavy Duty




Product Profile: MUPRO offers Single boosed clamps heavy-duty version, with DÄMMGULAST® yellow, galvanised.


Advantages
  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Application
  • Suitable for pipelines with dynamic loads in combination with expansion points
  • Suitable for fixings in industrial areas
  • Suitable for fixings in air-conditioning, ventilation and sanitary areas
  • For indoor use

Heat Shrinkable Tubing

Pipe Clamp, Optimal Junior




Product Profile: MUPRO offers OPTIMAL Junior® with DÄMMGULAST®, galvanised.


Advantages
  • Practical latching fastener
  • Easy clicking-in of the fastening bolt with the tip of a finger
  • High safety due to the positive-fit edge hook-in opening
  • The pipe is free to move during the installation
  • No inadvertent opening once it has clicked in, due to the safety latching fastener
  • Quick installation due to the single fastening bolt
  • The easy click-in fastener allows opening and closing of the pipe clamp with only one hand
  • Captive fastening bolt
  • Fastener retains the pipe securely even at the full opening angle of the clamp
  • DÄMMGULAST® vibration control lining with green identification stripe: average sound level improvement up to 18 dB(A)
  • Vibration control tested
  • This product is awarded with the "Gütezeichen Rohrbefestigung" (quality mark of pipe support) and is submitted to controls according to RAL-GZ 655-B
Application
  • Suitable for fixings in housing and industrial areas
  • Suitable for fastening of drinking water and heating pipes
  • For indoor use

Single Boosed Clamp,Junior

Swivel Hangers

Product Profile: MUPRO offers Swivel hangers, galvanised.


Advantages
  • Size range from ¾" to 8"
  • Made of carbon steel
  • Galvanised, other finish available upon request
  • Easy height adjustment due to knurled nut
  • Complies with Manufacturers Standardization Society MSS-SP-58 and MSS-SP-69 (Type 10)
  • Approved by FM and UL
Application
  • Attachment of sprinkler lines


Single Boosed Clamp,Junior

U bolts

Product Profile: MUPRO offers U-bolts, similar to DIN 3570, form A, galvanised.


Advantages
  • Design similar to DIN 3570
  • Standard material S235JR (St37) acc. to DIN EN 10025
  • Electrolytically galvanised
  • Supplied with 4 nuts acc. to DIN 934. In the M8 to M12 versions, also with 4 washers
Application
  • For simple pipe attachment in building technology and industrial construction




Insulation clamps RG 80

Insulation clamps RG 80




Product Profile: MUPRO India offer Insulation clamps, RG 80 with DÄMMGULAST® and insulation shells, galvanised.


Advantages
  • Rigorous avoidance of temperature bridges in hot or cold pipe work.
  • High insulation effect, low effective density.
  • Prevents the formation of condensation on the pipe clamp.
  • Vapour barrier due to the aluminium facing.
  • Good adhesion between shell and vibration lining due to releasing agent-free surfaces.
  • Longer shell lengths are available if the vapour barrier is required to overlap within the region of the butt Joints Load-distributing sleeves are available for improved spreading of the load.
  • Insulation shells and pipe clamps with DÄMMGULAST® lining are matched to fit exactly.
  • Average vibration reduction of up to 22.7 dB (A).
Application
  • Thermal decoupled pipe support in the field of refrigeration
  • Especially suitable for attachments in ventilation, air-conditioning, heating, refrigeration installations as well as for chilled water pipes.
Technical Specifications
  • Insulation thickness: 30 mm
  • Part no.: 124408
  • Shell material b x s [mm]: 25 x 2.0

Insulation clamps RG 250

Insulation clamps RG 250




Product Profile: MUPRO India offer Insulation clamps RG 250 with DÄMMGULAST® and insulation shells, galvanised.


Advantages
  • Rigorous avoidance of temperature bridges in hot or cold pipelines
  • Rigid, highly compressed PU insulation shell for heavy loads
  • High insulation effect
  • Prevents the formation of condensation on the pipe clamp
  • High vapour diffusion resistance
  • Easy, precise installation due to centring knobs
  • Structure-borne noise damping due to DÄMMGULAST® Vibration control lining with yellow identification stripe: Average vibration reduction of up to 22.7 dB (A)
  • Surfaces free from release agents allow good bonding with the pipe insulation
Application
  • Thermal decoupled pipe attachment in the field of refrigeration
  • Especially suitable for attachments in ventilation, air-conditioning, heating, refrigeration installations as well as for hot and chilled water pipes
Technical Specifications of Insulation clamps RG 250
  • Insulation thickness [mm]: 20
  • Shell length L [mm]: 40
  • Shell material b x s [mm]: 20 x 1.5
  • Part no.: 124401

Range of Products

Optimal Junior
Optimal Junior
Swivel hanger
Swivel hanger
U-bolt
U-bolts
channels 38/48
channels 38/48
Girder clamps
Girder clamps
Girder cleats
Girder cleats
Threaded rods
Threaded rods
Cap nutsDIN 1587
Cap nutsDIN 1587
Washers-Support channels
Washers-Support channels
Heavy duty BZ anchors
Heavy duty BZ anchors
anchors
anchors
Resilient pad
Resilient pad
Phonolyt Button
Phonolyt Button
Phonolyt Foot
Phonolyt Foot
Dammgulast Channel
Dammgulast Channel
Washers
Washers