Accessories


Girder Clamps
Girder Clamps
Product Profile: MUPRO offers Girder clamps with joint type Lindapter FLS, galvanised.


Advantages
  • Ideal solution for attachment of MPR-Support channels to steel girders
  • Allows subsequent adjustment of the channels along and across the supporting beam
  • Suitable for all flange thicknesses of common support profiles ( ? 24.5 mm)
  • Easy to install, pre-assembled kit
  • Proper attachment of suspended loads on girders


Application
  • For flexible attachment of hangers on inclined girders and flanges

Girder Cleats

Girder Cleats




Product Profile: MUPRO offers MPR-Girder cleats, galvanised.


Advantages
  • Ideal solution for attachment of MPR-Support channels to steel girders
  • Allows subsequent adjustment of the channels along and across the supporting beam
  • Suitable for all flange thicknesses of common support profiles ( ? 24.5 mm)
  • Easy to install, pre-assembled kit
  • Proper attachment of suspended loads on girders
Application
  • Attachment of MPR-Support channels to steel girders without drilling or welding
  • For indoor use

Threaded Rods

Threaded Rods




Product Profile: MUPRO offers Threaded rods, strength class 4.8, galvanised.


Advantages
  • Thread: M6, M8, M10, M12, M16, M20
  • Length [mm]: 1, 2, 3
  • SAP_VPE: 5, 10, 15, 20, 25, 50, 100


Cap Nuts

Cap Nuts




Product Profile: MUPRO offers Cap nuts, DIN 1587, galvanised.


Advantages
  • Thread: M8, M10, M12, M16, M20, M24

Washers

Washers

Product Profile: Washers for fixing of MPC-Support channels, galvanised.


Advantages
  • For thread: M6, M8, M10, M12, M16
  • Outer diameter [mm]: 18, 24, 29, 30, 36, 40


Single Boosed Clamp,Junior

Heavy Duty BZ Anchor

Product Profile: MUPRO offers Heavy-duty anchors BZ, galvanised.


Advantages
  • Secure anchorage due to slit splaying sleeve with serrations
  • Force-controlled splaying from the tightening torque
  • Secure splaying due to taper with slide coating
  • European Technical Assessment (ETA) for cracked concrete (tensile zone) and non-cracked concrete (compression zone)
  • Higher loading possible when used in the compression zone
  • Two effective anchorage depths for greater flexibility (maximum anchor length 210 mm)
  • Approved for seismic loads, performance categories C1 and C2 (maximum anchor length 210 mm)


Application
  • For anchorages of medium-weight  to heavy loads in cracked and non-cracked concrete
  • Attachment of wall hanger brackets, support channels, base plates, constructions made of metal and wood, cable trays, railings, etc.
  • Also applicable in hard natural stone


Steel Anchor

Steel Anchor

Product Profile: MUPRO offers Steel anchors, galvanised.


Advantages
  • Secure grip due to controlled splaying as the taper is driven in
  • Requires only small drilling depth
  • Flush finish with surface of the building material
  • Secure expansion force even when the mounting screw is loosened
  • European Technical Assessment (ETA) for non-cracked and cracked concrete (reduced loads)
  • If used the setting tools for check marking, test loading of the anchor is not required


Application
  • For anchorages of medium-weight loads in concrete and natural stone (hard) in dry interiors of buildings
  • Versatile and suitable for attachment with screws or threaded rods in all plumbing, heating and ventilation installations


Insulation clamps RG 250

Hexagonal Nuts and Clamping Sets

Product Profile: MUPRO India offers Hexagonal Nuts and Clamping Sets.


Application
  • Hexagonal nuts, DIN 934, galvanised
  • Clamping sets - for ML-Clamping body no. 702


Technical Specifications
  • Thread: M10
  • Nut height [mm]: 8.0
  • Spanner size [mm]: 17
  • Part no.: 105433


Hexagon Head Bolts

Hexagon Head Bolts


Product Profile:MUPRO India offers Hexagon Head Bolts, DIN 933, galvanised.


Technical Specifications
  • Thread: M6
  • Spanner Size (mm): 10
  • Length (mm): 20, 30
  • Part no.: 105733







Girder Clamps

Girder Clamps




Product Profile:MUPRO India offers Girder Clamps, galvanised.


Advantages
  • Attachment on girder without welding or drilling.
  • Subsequent alignment on the girder possible.
  • High loading capacity.
  • Quick, subsequent height adjustment of the threaded rods at the non-threaded through-hole.
  • Approved by VdS.
  • Sizes M10 and M12 have FM approval.
  • Also available with internal thread.
Application
  • For attachment of pipelines, air ducts and sprinkler systems on steel girders
  • For suspension of threaded pins and threaded rods for the attachment of pipe clamps or crossbeams made with MPC-Support channels
Technical Specifications
  • Clamping range [mm]: 3 - 18
  • Part no.: 130248

Range of Products

Optimal Junior
Optimal Junior
Swivel hanger
Swivel hanger
U-bolt
U-bolts
channels 38/48
channels 38/48
Girder clamps
Girder clamps
Girder cleats
Girder cleats
Threaded rods
Threaded rods
Cap nutsDIN 1587
Cap nutsDIN 1587
Washers-Support channels
Washers-Support channels
Heavy duty BZ anchors
Heavy duty BZ anchors
anchors
anchors
Resilient pad
Resilient pad
Phonolyt Button
Phonolyt Button
Phonolyt Foot
Phonolyt Foot
Dammgulast Channel
Dammgulast Channel
Washers
Washers